This article needs additional citations for. Unsourced material may be challenged and removed. (June 2015) () This is a list of TCP and UDP port numbers used by protocols of the of the for the establishment of host-to-host connectivity. Originally, were used by the (NCP) in the for which two ports were required for transmission. Later, the (TCP) and the (UDP) needed only one port for full-duplex, bidirectional traffic. The even-numbered ports were not used, and this resulted in some even numbers in the well-known port number range being unassigned. The (SCTP) and the (DCCP) also use port numbers.

They usually use port numbers that match the services of the corresponding TCP or UDP implementation, if they exist. The (IANA) is responsible for maintaining the official assignments of port numbers for specific uses. However, many unofficial uses of both well-known and registered port numbers occur in practice. Similarly many of the official assignments refer to protocols that were never or are no longer in common use. This article lists port numbers and their associated protocols that have experienced significant uptake. This section gives without describing their significance in the context of the article.

Please help by that describe the examples' significance, and by removing less pertinent examples. Or poorly sourced material may be challenged or removed. (October 2016) () The port numbers in the range from 0 to 1023 are the well-known ports or system ports. They are used by system processes that provide widely used types of network services. On operating systems, a process must execute with privileges to be able to bind a to an using one of the well-known ports.

Well-known ports Port TCP UDP Description IANA status 0 N/A N/A In programming APIs (not in communication between hosts), requests a system-allocated (dynamic) port N/A 0 Reserved Reserved Reserved Official 1 TCP Assigned (TCPMUX). Both TCP and UDP have been assigned to TCPMUX by IANA, but by design only TCP is specified. Official 4 Reserved Reserved Unassigned Official 5 TCP UDP Official 6 Reserved Reserved Unassigned Official 7 TCP UDP Official 8 Reserved Reserved Unassigned Official 9. This section gives without describing their significance in the context of the article. Please help by that describe the examples' significance, and by removing less pertinent examples. Or poorly sourced material may be challenged or removed.

(August 2016) () The range of port numbers from 1024 to 49151 are the registered ports. They are assigned by for specific service upon application by a requesting entity.

Template:Refimprove This is a list of Internet socket port numbers used by protocols of the transport layer of the Internet Protocol Suite for the establishment of. If port 9999 used by Apache GUI overlaps with another application on your system you can change it by editing ApacheGUI server.xml configuration file, search for.

On most systems, registered ports can be used without superuser privileges. • TCP • SCTP UDP Cisco (Service Assurance Agent) Official 1194 TCP UDP Official 1198 TCP UDP The Free dynamic transparent distributed computing in Java Official 1214 TCP UDP Official 1220 TCP Assigned administration Official 1234 TCP UDP search agent Official 1234 UDP default port for UDP/RTP stream [ ] Unofficial 1241 TCP UDP Security Scanner Official 1270 TCP UDP Microsoft (SCOM) (formerly Microsoft Operations Manager (MOM)) agent Official 1293 TCP UDP Internet Protocol Security () Official 1311 TCP UDP Windows RxMon.exe Official 1311 TCP Dell HTTPS Unofficial 1314?? See also: The range 5 (2 15 + 2 14 to 2 16 − 1) contains dynamic or private ports that cannot be registered with IANA.

This range is used for private or customized services, for temporary purposes, and for automatic allocation of. Dynamic, private or ephemeral ports Port TCP UDP Description 5 Yes No 0 Port 22 Yes Range from which – a remote-terminal application similar to – typically assigns ports for ongoing sessions between Mosh servers and Mosh clients. See also [ ] •. The Internet Assigned Numbers Authority (IANA). • Michelle Cotton; Lars Eggert et al. (August 2011)....

Retrieved 2014-04-01. • – File Formats •. Retrieved 2015-01-17. (November 1988)... Retrieved 2016-09-28. • (May 1983)...

Retrieved 2016-09-28. Apple (published 2016-02-05). From the original on 2016-09-13. Retrieved 2016-09-13.

• ^ Stewart, Randall R., ed. (September 2007)... Retrieved 2016-09-27.

• (May 1983)... Retrieved 2016-10-07. From the original on 2016-09-27. Retrieved 2016-09-27. The default port for the wake-up transmission is UDP port 9..

ETutorials. The ps -ef and netstat -a commands are bound to TCP ports 11 and 15, respectively. • (May 1983).... • (May 1983)...

Retrieved 2016-09-27. • (May 1983)...

Retrieved 2016-09-27. • Nelson, Russell (June 1990)... Retrieved 2016-09-27.

• Nelson, Russell; Arnold, Geoff (April 1992)... Retrieved 2016-09-27. • (May 1983)... Retrieved 2016-09-27. • (June 1980)... Retrieved 2016-09-27.

•; (October 1985)... Retrieved 2016-09-27.

•; (May 1983)... Retrieved 2016-09-28. • (August 1982)...

Retrieved 2016-09-28. •; Harrenstien, K. (May 1983)...

Retrieved 2016-09-28. • Ullmann, Robert (June 1993).... Retrieved 2016-10-16. '. The RAP protocol operates on TCP port 38, with peers opening a symmetric TCP connection between the RAP ports on each system.. RAP is also used on UDP port 38, as a peer discovery method..'

• Accetta, M. (December 1983)... Retrieved 2016-09-28.

'. The 'well-known' UDP port number for the Resource Location Protocol is 39 (47 octal)..' • (August 1979)... Retrieved 2016-09-28.

• Harrenstien, Ken; White, Vic (1982-03-01)... Retrieved 2016-09-28. • Harrenstien, K.; Stahl, M.; Feinler, E. (October 1985)... Retrieved 2016-09-28. • Daigle, Leslie (September 2004)..

Ran Atkinson, Ken Harrenstien, Mary Stahl, Elizabeth Feinler.. Retrieved 2016-09-28. • Finseth, Craig A. (July 1993)... Retrieved 2016-09-28. • Dorner, Steve; Resnick, Pete (June 1992)... Retrieved 2016-09-28.

• Sollins, Karen R. Retrieved 2016-10-16. • Sollins, K.R. (June 1981).., Bob Baldwin,, Steve Szymanski, Larry Allen, Geoff Cooper, Mike Greenwald, Liza Martin,.. Pp. 6, 14, 16..

Retrieved 2016-10-16. • Sollins, Karen R. (July 1992)... Pp. 4–5, 9, 10..

Retrieved 2016-10-16. • Anklesaria [?], Farhad;; Lindner, Paul; Johnson, David; Torrey, Daniel; Alberti, Bob (March 1993)... Pp. 1, 4–5, 7, 11–13.. Retrieved 2016-10-16. '. This protocol assumes a reliable data stream; TCP is assumed.

Gopher servers should listen on port 70 (port 70 is assigned to Internet Gopher by IANA)..' Retrieved 2016-10-16.

Retrieved 2016-10-16. •; Vernon, J.

(January 1983)... Retrieved 2016-10-16. • Karrenstien, K. Retrieved 2016-10-16.

• Zimmerman, David Paul (December 1991).... Retrieved 2016-10-16.

'. Finger is based on the Transmission Control Protocol, using TCP port 79 decimal.' (published 2016-05-06). From the original on 2016-10-16. Retrieved 2016-10-16. •;; Mogul, Jeffrey C.;; Masinter, Larry; Leach, Paul J.; (June 1999)...

Pp. 13, 19–20, 37, 129.. Retrieved 2016-10-16. '. HTTP communication usually takes place over TCP/IP connections.

The default port is TCP 80.' •; Reschke, Julian F., eds. (June 2014)... Pp. 11, 17, 19, 42–43, 50.. Retrieved 2016-10-16. •; Peon, Roberto (May 2015).. In Thomson, Martin...

Retrieved 2016-10-16. '. HTTP/2 uses the same 'http' and 'https' URI schemes used by HTTP/1.1. HTTP/2 shares the same default port numbers: 80 for 'http' URIs and 443 for 'https' URIs..' • Kohl, John; Neuman, B.

Clifford (September 1993).... Retrieved 2016-10-16. '. When contacting a Kerberos server (KDC). the client shall send a UDP datagram containing only an encoding of the request to port 88 (decimal) at the KDC's IP address.'

• Neuman, Clifford; Yu, Tom; Hartman, Sam; Raeburn, Kenneth (July 2005).. Acknowledgements to John Kohl et al. In section 11 'Acknowledgements', pages 121–122.. Pp. 102–103, 105.. Retrieved 2016-10-16. '. Kerberos servers (KDCs) supporting IP transports MUST accept TCP. UDP requests and SHOULD listen for them on port 88 (decimal).'

(April 1986)... Pp. 5, 8, 12–13, 23–24.. Retrieved 2016-10-17. '. A TSAP server begins by LISTENing on TCP port 102..' • Rose, Marshall T.; Cass, Dwight E. (May 1987)...

Retrieved 2016-10-17. '. TCP port 102 is reserved for hosts which implement this standard..' • Hedberg, Roland; Pomes, Paul (September 1998).... Retrieved 2016-10-17. '. Initially, the server host starts the Ph service by listening on TCP port 105..' • Postel, Jon (November 1982)...

Retrieved 2016-10-17. '. the specific service of User Telnet may be accessed (on hosts that choose to provide it) by opening a connection to port 107 (153 octal)..' • Butler, M.;; Chase, D.; Goldberger, J.; (February 1985)... Retrieved 2016-10-17. '. This protocol assumes a reliable data stream such as provided by TCP or any similar protocol. When TCP is used, the POP2 server listens on port 109.' • (November 1988)...

Retrieved 2016-10-17. '. the server host starts the POP3 service by listening on TCP port 110..' • Myers, John G.; (May 1996)... Retrieved 2016-10-17. '. the server host starts the POP3 service by listening on TCP port 110..' Johns, Michael C. (February 1993)...

Acknowledgement is given to Dan Bernstein in section 7, 'Acknowledgements', page 8.. Retrieved 2016-10-17. '. The Identification Protocol (a.k.a., 'ident', a.k.a., 'the Ident Protocol'). listens for TCP connections on TCP port 113 (decimal)..'

Johns, Michael C. (January 1985)...

Retrieved 2016-10-17. '. The Authentication Server Protocol provides a means to determine the identity of a user of a particular TCP connection.. A server listens for TCP connections on TCP port 113 (decimal)..' • Lottor, Mark K.

(September 1984).. Retrieved 2016-10-17.

'. SFTP is used by opening a TCP connection to the remote hosts' SFTP port (115 decimal)..' • Kantor, Brian; (February 1986)... Pp. 5, 20–23..

Retrieved 2016-10-17. '. NNTP specifies a protocol for the distribution, inquiry, retrieval, and posting of news articles. When used via Internet TCP, the contact port assigned for this service is 119..'

• Feather, Clive D.W. (October 2006)... Acknowledgements to NNTP Working Group (Russ Allbery, ), Brian Kantor, et al.) in section 13, 'Acknowledgements', pages 107–109.. Retrieved 2016-10-17. '. Network News Transfer Protocol (NNTP). is used for the distribution, inquiry, retrieval, and posting of Netnews articles using a reliable stream-based mechanism.. The official TCP port for the NNTP service is 119..' Retrieved 2014-05-27.

• ^ NetBIOS Working Group (March 1987).. Acknowledgements to 's End-to-End Services Task Force et al. In section 2, 'Acknowledgements', page 6... Retrieved 2016-10-17. • ^ NetBIOS Working Group (March 1987)..

Acknowledgements to in section 2, 'Acknowledgements', page 4... Retrieved 2016-10-17. • (March 2003)....

Retrieved 2016-10-17. '. The Internet Message Access Protocol. allows a client to access and manipulate electronic mail messages on a server.. The IMAP4rev1 protocol assumes a reliable data stream such as that provided by TCP. When TCP is used, an IMAP4rev1 server listens on port 143..' • DeSchon, A.; Braden, R. (August 1988)... Pp. 4, 14, 20, 24..

Retrieved 2016-10-17. '. The BFTP program. can be executed as a remotely-accessible service that can be reached via a Telnet connection to the BFTP well-known port (152)..'

• Davin, J.; Case, J.; Fedor, M.; Schoffstall, M. (November 1987).... Retrieved 2016-10-17. '. This memo defines a simple application-layer protocol by which management information for a gateway may be inspected or altered by logically remote users.. An authentication protocol entity responds to protocol messages received at UDP port 153 on the host with which it is associated..' • Lambert, M.

(June 1988)... Retrieved 2016-10-17. '. Pcmail is a distributed mail system providing mail service to an arbitrary number of users. The TCP contact port for DMSP has been designated 158..' • ^ Case, J.; Fedor, M.; Schoffstall, M.; Davin, C.

(May 1990)... Acknowledgements to IETF SNMP Extensions working group in section 6, 'Acknowledgements', page 33.. Retrieved 2016-10-17.

'. A protocol entity receives messages at UDP port 161 on the host. Messages which report traps should be received on UDP port 162 for further processing..' Cisco (published 2006-10-10). From the original on 2016-10-17. Retrieved 2016-10-17. (Version 1.1 ed.).. From the original on 2016-01-09. Retrieved 2016-10-17. The purpose of the X Display Manager Control Protocol (XDMCP) is to provide a uniform mechanism for an autonomous display to request login service from a remote host.. When XDMCP is implemented on top of the Internet User Datagram Protocol (UDP), port number 177 is to be used..

[ ] • Rekhter, Yakov; Li, Tony; Hares, Susan, eds. (January 2006).. Acknowledgements to Kirk Lougheed et al. In section 2, 'Acknowledgements', pages 6–7.. Pp. 8, 47–48, 51–52..

Retrieved 2016-10-17. '. BGP listens on TCP port 179..' • ^ Hartmann, Hartmann (August 2014)... Retrieved 2016-10-06.

' Although system port assignments exist for IRC traffic that is plain text (TCP/UDP port 194) or TLS/SSL encrypted (TCP/UDP port 994).' • (May 1991)... Acknowledgements to Jeffrey S. In section 5 'Acknowledgements', page 12.. Retrieved 2016-10-27. '. When using the TCP to provide the transport-backing for the SMUX protocol, the SNMP agent listens on TCP port 199..'

(published 2011-05-26). From the original on 2016-10-27. Retrieved 2016-10-27. SMUX is the snmp multiplexing protocol (). It can be used by an snmp agent to query variables maintained by another user-level process.. Santa Clara, CA, USA: Network Associates, Inc., now. Archived from on 2000-03-03. Retrieved 2013-10-26.

Retrieved 16 March 2015. (published 2014-03-28). From the original on 2017-08-02. Retrieved 2017-08-02. Retrieved 2014-05-27.

• Zwicky, Elizabeth D.; Cooper, Simon; Chapman, D. Brent (June 2000) [1st pub. (Second ed.).. From the original on 2016-10-27. Retrieved 2016-10-27. IMAP over SSL currently uses port 993, but an earlier convention uses port 585.. Retrieved 2014-05-27.

Retrieved 2014-05-27. • (expired: September 2003) •. Retrieved 2014-05-27.

Retrieved 2014-05-27. Retrieved 2014-05-27. Retrieved 2014-05-27. Retrieved 2014-05-27. Retrieved 2014-05-27. • February 1, 2009, at the.

Retrieved 2014-05-27. Retrieved 2014-05-27. Archived from on 2012-09-19.

Retrieved 2014-05-27. • January 18, 2012, at the. (published 2004-07-01). From the original on 2017-05-19. Retrieved 2017-05-19. • Adams, Carlisle; Farrell, Stephen; Kause, Tomi; Mononen, Tero (September 2005).... Retrieved 2017-11-10.

Retrieved 2014-05-27. VMware Knowledge Base. From the original on 2016-10-06.

Retrieved 2016-10-06. VMware Knowledge Base. From the original on 2016-10-06. Retrieved 2016-10-06. (5.0.0-19 ed.).

(published 2007-01-23). From the original on 2016-10-06. Retrieved 2016-10-06. default TCP port 953. allow rndc commands. • – Administration and Privileged Commands. TCP port. BIND 9's default control channel port, 953.. FW-1.de (published 2007-01-02). From the original on 2016-10-06.

Retrieved 2016-10-06. 981 /tcp. remote administration from external using HTTPS. (published 2009-10-08). From the original on 2017-07-05.

Retrieved 2017-07-05. • On WSUS 3.2 and earlier, port 80 for HTTP and 443 for HTTPS • On WSUS 6.2 and later (at least Windows Server 2012), port 8530 for HTTP and 8531 for HTTPS. • Ohling, Freerk; Varley Jamieson, Helen; Rastapopoulos, Roberto; Schoen, Seth; booki; et al.

From the original on 2016-10-24. Retrieved 2016-10-24. Freegate is a proxy tool. If you want to use another application with Freegate. you will have to configure them to use Freegate as a proxy server.. the port is 8580.. (published 2010-07-01). Retrieved 2016-10-25. Frederik Slijkerman. From the original on 2016-10-25. Retrieved 2016-10-25. Ultra Fractal enables you to distribute calculations over multiple computers connected with a network.. Ultra Fractal uses the TCP/IP protocol for network calculations,.

Frederik Slijkerman. From the original on 2016-10-25. Retrieved 2016-10-25. To be able to connect to a remote computer, Ultra Fractal must be running in server mode. By default, the server listens on port 8691 for connections. Archived from on 2016-10-25. Retrieved 2016-10-25.

(published 2017-06-27). (PDF) from the original on 2017-07-06. Retrieved 2017-07-06. The Nessus UI uses port 8834.. By default, Nessus is installed and managed using HTTPS and SSL, uses port 8834. • Vaughan-Nichols, Steven J. From the original on 2016-10-25.

Retrieved 2016-10-25. Unite is both a Web browser and a Web server. With the included JavaScript applets,. To make this happen, your PC and its Internet connection have to have port 8840 open.. • The How-To Geek (2010-02-15)... From the original on 2016-10-25. Retrieved 2016-10-25. Unite automatically hooks into your router using uPnP to dynamically open port 8840, but it can also use a Unite proxy server when you're behind a more restrictive firewall. From the original on 2016-10-25.

Retrieved 2016-10-25 – via. CDDB (CD database) is an information database containing artist, disc title, track titles, and other information for digital audio compact discs.. There are two forms of remote access to CDDB servers, CDDBP and HTTP. All current CDDB servers answer either at IP port 888 or 8880 for CDDBP and port 80 for HTTP access.. (published 2016-07-25). From the original on 2016-10-25.

Retrieved 2016-10-25. From the original on 2016-10-25. Retrieved 2016-10-25. TCP/IP port 1883 is reserved with IANA for use with MQTT. TCP/IP port 8883 is also registered, for using MQTT over SSL..

• Banks, Andrew; Gupta, Guhan, eds. (Plus Errata 01 ed.).. From the original on 2016-10-25. Retrieved 2016-10-25. TCP ports 8883 and 1883 are registered with IANA for MQTT TLS and non TLS communication respectively.. • Ivanov, Paul; et al.

In Baecker, Arnd.. IPython (3.2.1 ed.). From the original on 2016-10-25. Retrieved 2016-10-25. The IPython notebook web-application is based on a server-client structure.. By default, a notebook server runs on and is accessible only from localhost.. (Latest ed.). From the original on 2016-10-25. Retrieved 2016-10-25 – via Read the Docs. By default, the notebook server starts on port 8888.

If port 8888 is unavailable or in use, the notebook server searches the next available port.. From the original on 2017-06-30. Retrieved 2017-06-30. If you didn’t start Solr after installing it, you can start it by running bin/solr from the Solr directory.. This will start Solr in the background, listening on port 8983..

• Gaudin, Olivier.. Archived from on May 12, 2014. Retrieved 2014-05-27.

Retrieved 2014-05-27. Retrieved 27 June 2015. [ ] • January 4, 2012, at the.

Apache Kafka. Retrieved 2017-09-01. Retrieved 2015-04-04. Retrieved 2013-10-08. Retrieved 2013-10-08. • ^ Konopelko, Piotr Robert (2016-08-04). Kruszona-Zawadzka, Agata, ed.

(PDF) (1.0.4 ed.). Pp. 11, 19–23, 58, 62, 74–76. (PDF) from the original on 2016-08-30.

Retrieved 2016-08-30. Archived from on September 23, 2013. Retrieved 2013-10-08. • ^ Bergkvist, Christoffer (2012-08-02).. From the original on 2016-09-27. Retrieved 2016-09-27. Tvheadend listens to the following TCP ports by default. • 9981 - HTTP server (web interface) • 9982 - HTSP server (Streaming protocol).

(published 2016-12-16). Retrieved 2017-12-13. Retrieved 2014-05-27. Retrieved 2014-05-27. Retrieved 2016-05-10. Archived from on April 19, 2014. Retrieved 2013-10-08.

October 2015. October 2015. • John, Ted (2015-11-25)... From the original on 2017-04-26. Retrieved 2017-04-26. enter the hostname or IP address (and optionally a port if the server is not using the default OpenRCT2 port, 11753).. configure your router to forward TCP connections on your chosen port (default is 11753). Second Life Wiki. Retrieved 26 July 2017.

Second Life Wiki. Retrieved 26 July 2017. Cube World Wiki.

Retrieved 2013-10-08. Retrieved 2014-09-05. • Scheduler-Usage.. Archived from on May 2, 2013.

Retrieved 2014-05-27. From the original on 2017-09-23.

Retrieved 2017-09-23. The Web UI is located at. NB: The port for RabbitMQ versions prior to 3.0 is 55672.. Retrieved 2014-05-27. Retrieved 2014-05-27. • ^, Google Code Help, accessed December 15, 2010. From the original on 2014-04-08. Retrieved 2014-05-27. Retrieved 2015-12-20.

Retrieved 2016-11-07. Retrieved 2017-06-29. Retrieved 2017-06-29. Retrieved 2013-10-08. From the original on 2016-08-27. Retrieved 2016-08-27.

• Kleinman, Sam; et al... From the original on 2017-11-10. Retrieved 2017-11-10.

Valve Developer Community (Revision 209464 ed.).. From the original on 2017-06-29. Retrieved 2017-06-29.

From the original on 2017-06-29. Retrieved 2017-06-29. Servers use the ports 28785 (UDP) and 28786 (UDP).. [ ] • ^ (PDF)..

(PDF) from the original on 2017-06-29. • TCP: Allow traffic to all destinations on ports: 28910, 29900, 29901, 29920, 80, and 443.

• UDP: Allow all traffic to all destinations. (Necessary for peer-to-peer connections and game play). Activision Support.. From the original on 2017-06-30. Retrieved 2017-06-30.

• – User Commands • (PDF) (UNV-113-INST-1 ed.). Rocket Software. Pp. 3–8, 4–8. When you install UniVerse on your system for the first time, you must add the UniRPC daemon's port to the /etc/services file.

Add the following line to the /etc/services file: uvrpc 31438/tcp # uvrpc port. Archived from on 2013-10-05. Retrieved 2016-10-18. • Pedersen (2012-03-24).. From the original on 2016-10-18. Retrieved 2016-10-18. Support ( FAQ).

From the original on 2016-10-18. Retrieved 2016-10-18. TCP: 32400 (for access to the Plex Media Server). • Gallagher, Sean (2014-01-02)... From the original on 2016-11-09. Windows Vista Home Premium 32 Bit Sp2 Torrent there.

Retrieved 2016-11-09. A hacker has found a backdoor to wireless combination router/DSL modems. The attack, confirmed to work on several Linksys and Netgear DSL modems. the router responded to messages over an unusual TCP port number: 32764.. the backdoor might affect wireless routers with DSL modems from SerComm,. From the original on 2016-10-18.

Retrieved 2016-10-18.

As an owner of the website it is very difficult to manage multiple websites without a control panel. However to suit the needs, we need a custom hosting plan. A Web hosting control panel is a totally web-based interface which has capability to manage your web services under a single location. These web based control panels can manage email accounts, FTP accounts, file management functions, creation of subdomains, disk space monitoring, bandwidth monitoring, create backups and many more. The web hosting control panels provides a elegant solution to Linux newbies to host multiple websites on VPS ( Virtual Private Servers) and Dedicated Servers. This kind of hosting panel offers easy to use management software’s to simplifies the process of handling servers without the need of expert knowledge of sever administration. The most famous and powerful control panels are cPanel and Plesk.

These two popular panels are paid software’s and hosting provider will charge a monthly fee for installing it on the server. Fortunately, there are few more alternate open source control panels available to download at no cost with similar features. Don’t Miss: Now, let’s move further to explore the 20 most preferred open source/paid control panels one-by-one. For your reference I’ve included the screen grabs along with relevant links to each portal.

CPanel cPanel is a Unix based hosting control panel. The Graphical interface helps you to manage your Website and web hosting accounts very easily and quickly. The automation tools are designed to simplify the process of website. CPanel give you a complete control over the various aspects of website and administration through a standard web browser and also streamlines the process such as Creating database, setting up email account and auto responder and managing website files.

Plesk Plesk is a hosting control panel similar to cPanel which allows you to manage your hosting account through web based interface. You can use this panel with VPS, Shared and Dedicated server. Plesk also enables you to control thousands of virtual host under a single machine. The control panel allows you to automate many tasks which in turn reduce the cost and resources. It also increases the profitability, efficiency and customer satisfaction. Features • Create FTP account for users.

• Manage and create email account and database like MySQL and PsotgreSQL. • Add domains and subdomains. • Restore and take back up of files. Гдз По Алгебре И Геометрии 8 Класс Ершова Онлайн. • Manage DNS and other resources. Plesk Control Panel 3.

ISPConfig ISPconfig is an open source multilingual control panel which enables you to manage multiple servers under one control panel. ISPConfig is licensed under the BSD license. This open source control panel is also capable of managing FTP, SQL, BIND DNS, Database and Virtual servers. Features • Manage more than one server from one control panel. • Easy to use web interface for administrator, reseller and client login. • Manage web servers like Apache and Nginx. • Configuration mirroring and clusters.

• Manage email and FTP servers. • And many more. Ajenti Ajenti, the only open source feature rich, powerful and lightweight control panel that provides responsive web interface for managing small server set-ups and also best suitable for Dedicated and VPS hosting. It comes with many built-in pre-made plugins for configuring and managing server software’s and services such as Apache, Nginx, MySQL, FTP, Firewall, File System, Cron, Munin, Samba, Squid and many other programs like File Manager, Code Editor for developers and Terminal access. Virtualmin 13. WebMin WebMin a super functional and powerful web hosting control panel.

The software tool is designed to manage Unix and Linux platform in a simple way. WebMin is capable enough to manage various components of web based environment from setting a webserver to maintaining FTP and email server. Features • Configure and create virtual server on Apache.

• Manage, install or delete a software packages ( RPM format). • For security you can set up firewall. • Modify DNS settings, IP address, routing configuration.

• Manage database, tables and fields on MySQL. DTC Control Panel 15.

DirectAdmin DirectAdmin is an open source web hosting control panel that provides graphical admin interface to manage unlimited websites, emails accounts etc. The tasks are automated means DirectAdmin can manage your task automatically to set up and manage websites easily and quickly. Features • Manage and create email account and manage database.

• Create FTP account for users. • Manage frontpage extension, DNS and view statistics. • Built in File Manager to manage uploads • Set up error pages and directory password protection. DirectAdmin 16. InterWorx InterWorx is a Linux server management system and web hosting control panel. InterWorx has a set of tolls that provides admin user to command their own servers and the end users can over view the operation of their website. This Control panel is basically divided into two operating modes.

• Nodeworx: Nodeworx is an administrator mode that helps managing server. • SiteWorx: SiteWorx is a website owner view that helps end users to manage their hosting account and features. Nodeworx Screenshot.

ISPsystem ISPmanager is a commercial web hosting control panel with perfect balance of functionality & price. It comes in two editions: Lite, for managing own VPS and Dedicated servers, and Business, for providing shared and reseller hosting. ISPmanager has all features, commonly found in premium panels. With its help you can manage websites; create domains, users, databases & many more. This panel already has 18 years of history and is currently one of the most popular control panels in Russia/CIS countries, and is rapidly gaining wide-spread popularity in many others.